• Home
  • .
  • News
  • .
  • Dental Chair | Operating procedures of dental chair

Dental Chair | Operating procedures of dental chair

Foshan Cingol Medical Instrument located in Nanhai District ,Foshan,Guangdong,China, focused on dental instruments research development ,manufacture and sales;the RD dept.was set up in May of 2012,Company officially registered in July of 2014; dedicated to provide the best, efficient and safest dental products to users from China and the whole world.We provide dental chair. You can browse related products and initiate consultations on our website.
Operating procedures of dental chair:
1. The internal structure of the oral comprehensive treatment table is mainly composed of three systems: air circuit, water circuit and electric circuit.
(1) Circuit: The main working voltage is AC 200V±10%, and the control circuit voltage is generally below 36V. A regulated power supply can be installed to ensure normal operation and avoid leakage and injury to patients. The maintenance personnel of the above three routes (gas, water, electricity) must solve them from the source to ensure the normal operation of the equipment.
(2) Air circuit: Mainly powered by an air compressor, through various control valve bodies, for high-speed handpieces, low-speed handpieces, three-purpose guns and dental scalers. First of all, install the basic equipment of the work before the gas outlet of the air compressor to the gas supply pipeline. The T-level and A-level secondary filters (replace the filter element once a year) ensure that the air before the input management is free of impurities, oil, and water. . The pressure is maintained between 0.5-0.7MPA.
(3) Waterway: Generally, the main water source is tap water. Impurities and silt are unavoidable. If a grain of sand in the water enters the mobile phone, it will cause bearing damage. For this reason, install a water before the tap water enters the comprehensive treatment machine. Filter (under the premise that the pressure can reach 0.15-0.2MPA), the filtering effect: turbidity <5, clean the filter element and filter cloth once 1-2 months to ensure that the water supply is free of sand and turbidity. The filter has been used for more than 1 year; the pressure loss of the filter element is more than 0.1MPA, the filter element is contaminated, and the effluent water is suddenly turbid. Clean or replace the filter element of the filter in time. The filter element should be cleaned with an ultrasonic cleaner or a neutral detergent. When installing the filter element, be careful not to use too much force to avoid crushing the filter element. When installing the water filter cover, pay attention to sealing.

Recommend Read

  • Contact info


  • Request for a Quote

    Feel free talk to us

  • Location

    Building 6-1, Nansha Industrial Village, Jiangli North Rd, Danzao Town,Nanhai District, Foshan ,Guangdong,China.